30L PS-dive high pressure float, maximum recommended pressure until 2 bar.
The PS-dive WAHOO high pressure buoys are manufactured with a reinforced fabric and PVC coated. The buoy is very strong and at the same time light, so that it is not difficult to tow and can be easily taken on a trip.
The buoy is made with thermo-welds, without any manual gluing that could weaken the joints.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
MATERIAL: The PS-dive WAHOO high pressure buoys are manufactured with a reinforced fabric and PVC coated. The buoy is very strong and at the same time light, so that it is not difficult to tow and can be easily taken on a trip. The buoy is made with thermo-welds, without any manual gluing that could weaken the joints.
DESIGN: It is shaped with a "waist" that allows the floatline or bungee to be attached. The diver can take a quick jump into the water and jump into action without having to unroll the floatline. Due to the need to provide the buoy with high visibility, they are manufactured in yellow, safety comes first when the boats are close.
INFLATING: PS high pressure buoys can be inflated WITHOUT EXCEEDING 2 bar (kg / cm2). CAUTION: Do not leave the water in direct sunlight or travel by plane with it inflated. It has two inflation systems: one through a standard semi-rigid type valve (RIB) or pneumatic boat valve, and another with an adapter included to convert the pneumatic boat inflator valve into a car tire valve. The air can be easily removed for storage or travel.
ACCESSORIES:
It has two stainless steel "D" rings with a breaking load of 150 Kg: one on the front for joining the floatline and the other on the bottom-back to make buoy trains or hang objects.
It has a large handle on the back, resistant to “surf with the buoy when it is dragged by the boat or a large fish, or to hold on in an emergency.
It has a removable “Alpha” flag for diver signaling.
Adapter to be able to inflate the buoy from a car or bike type valve, or from a manual inflator of a pneumatic boat float.
Spearmaster speargun, barrel 130cm made with anodized aerospace aluminum barrel with the latest S.O.T (Strucuratlly Offset Technology), integral removable guide to change the open or included spear track, 7.5mm spear with shark fin pins and two circular power bands.
Double envelope signal buoy.
PVC inner bladder and nylon outer envelope.
Supplied with 17m of orange line + “FOX” flag.
The weight bag is attached to the end of the float.
When a 2kg weight is placed, the buoy is in "beacon" mode, thus creating better visibility in the water and greater safety.
The beacon position is used to mark a point or mark a...
3 Atm float, filled to 44psi max or 3 Atm.
Triple-sheath tough Cordura construction provides optimum durability and longevity.
Neon Yellow high visibility colour, stands out on the waves.
Reinforced S/S and D-ring anchor point.
Oral inflation valve with a high pressure pump adaptor.
34L of lift capacity at the surface with no volume reduction until after...
High performance pressurized 15L inflatable float, South African style. With specifications for "Blue Water Hunting" and "extreme spearfishing", was designed and built by SpearMaster. Tested up to 30 psi.
15L PS-dive high pressure float, maximum recommended pressure until 2 bar.
The PS-dive WAHOO high pressure buoys are manufactured with a reinforced fabric and PVC coated. The buoy is very strong and at the same time light, so that it is not difficult to tow and can be easily taken on a trip.
The buoy is made with thermo-welds, without any manual gluing...
Spearmaster 7.5 liter buoy consists of a PVC structure with foam inside.Designed to withstand the pressure in depth, the exterior PVC structure gives extra resistance. It has clips at both ends so can be added a bungee, a floatline or other float.
Rob Allen rigid floats, injected with a high density foam that makes them one of the most durable floats designed for long time use.They are supplied with clips at both ends, alfa flag and counterweight.
High performance pressurized 60L inflatable float, South African style. With specifications for "Blue Water Hunting" and "extreme spearfishing", was designed and built by SpearMaster. Tested up to 30 psi.
Safety recommended pressure 15 and 30L: 1.5 bar (~1.5 atm or 22 psi).
Safety recommended pressure 60L: 1.0 bar (~1 atm or 15 psi).
Rob Allen rigid floats, injected with a high density foam that makes them one of the most durable floats designed for long time use.They are supplied with clips at both ends, alfa flag and counterweight.
Inflatable float from Neptonics Systems, with buoyancy of 75 pounds (34kg) on the surface, durable and reliable, built in high strength and abrasion resistant denier nylon. The float has an inflation valve with high quality locking.
Due to its characteristics, the Neptonics inflatable float can be used in shore spearfishing, as well as, due to the 75...
High performance pressurized 30L inflatable float, South African style. With specifications for "Blue Water Hunting" and "extreme spearfishing", was designed and built by SpearMaster. Tested up to 30 psi.
30L PS-dive high pressure float, maximum recommended pressure until 2 bar.
The PS-dive WAHOO high pressure buoys are manufactured with a reinforced fabric and PVC coated. The buoy is very strong and at the same time light, so that it is not difficult to tow and can be easily taken on a trip.
The buoy is made with thermo-welds, without any manual gluing that could weaken the joints.
